Pogo Probes!

Pogo probes!

Everyone likes new tools right? Well, my eye caught some neat pogo probes posted on the Adafruit Industries Blog a few months back, and was intrigued. I wanted a pair, but I shied away from the short handles. Then, a few days ago, it happened. I was cleaning out one of my toolboxes, and voila! I found a pair of old probes with bent tips, perfect for making into pogo probes. I also had some pogo pins from Adafruit laying around, waiting to be used for something besides having breadboard wars with ‘micro spears’. Anyway, here is how I made them with a few pictures. You will need an old pair of meter probes, pogo pins, a small hand drill, a Dremel with a cut off wheel (a steel hacksaw will also work), a vice, heat shrink, and a few ounces of patience for this project.

*Just a side note: the vice used in these pictures is a PanaVice Jr. I got mine from Adafruit Industries. I did not want to mount mine to my bench permanently, so I filled the base solid with lead. It is awesome, if you don’t have one, get one. It will change your life. (Actual life changing experience may vary.)

Step 1: Select a probe to convert. It doesn’t matter if the end is bent as it will be cut off anyway.

The stock probe Continue reading